[1704x2272]
Closer view of the mounting arm. This was installed with a bucket truck in the middle of a snow storm. Hence the sloppy installation with the zip ties holding the anemometer in place. None-the-less, it has worked well for over 18 months and shows no signs of failing.
Viewed: 1381 times.
|
[2272x1704]
Mounting arm with anemometer, wind vane, and tee installed.
Viewed: 1027 times.
|
[2272x1704]
Anemometer, wind vane, tee, and mounting arm on tilted over tower. The tee is held into the mounting arm using standard hose clamps (not included) and the mounting arm is attached to the tower with 3/8" u-bolts (also not included).
Viewed: 1075 times.
|
|
