2.1kW grid-tied solar near Plainview, MN 
Trenching for the 60 amp 240 volt service.
[768x1024] [1704x2272]
Trenching for the 60 amp 240 volt service.
Viewed: 4013 times.

Jim Heaser works on leveling the old decks that will serve as the base for the solar panels.
[1024x768] [2272x1704]
Jim Heaser works on leveling the old decks that will serve as the base for the solar panels.
Viewed: 3905 times.

Jesse Smith (left) and Will Hesch (right) work on attaching the panels to the 2 Seas mounts. We were short lots of washers, but otherwise the mounts went together great.
[1024x768] [2272x1704]
Jesse Smith (left) and Will Hesch (right) work on attaching the panels to the 2 Seas mounts. We were short lots of washers, but otherwise the mounts went together great.
Viewed: 4535 times.

The APRS World crew, Jim Heaser, and Anton after a hard day of work.
[1024x768] [2272x1704]
The APRS World crew, Jim Heaser, and Anton after a hard day of work.
Viewed: 3940 times.

The finished 2.1kW array a few weeks after installation.
[1024x768] [2272x1704]
The finished 2.1kW array a few weeks after installation.
Viewed: 4128 times.

AC sub-panel, SMA SunnyBoy 2500 watt inverter, AC outlet, and DC disconnect.
[1024x768] [2272x1704]
AC sub-panel, SMA SunnyBoy 2500 watt inverter, AC outlet, and DC disconnect.
Viewed: 4025 times.

James Jarvis in front of the array, January 2007. Rated at 2.1kW, the array was producing 2096 watts when the photo was taken. This was most likely due to it being 0 degrees F.
[1024x768] [2272x1704]
James Jarvis in front of the array, January 2007. Rated at 2.1kW, the array was producing 2096 watts when the photo was taken. This was most likely due to it being 0 degrees F.
Viewed: 4027 times.

Return to APRS World's main website.

RSS