Introduction:
Many applications require only a single anemometer or wind vane mounted on a mast or pole. For this type of application the mast adapter is available. The adapter is machined from solid 316ss bar stock for strength and corrosion resistance. The adapter has a 0.5” O.D. sensor mount on one end and a female 1.0” NPT thread on the other. This allows the use of standard pipe and pipe fittings to install the sensor. The overall length of the mast adapter is 6.0” and the 0.5” O.D. sensor mount section is 3.0”. The outside surfaces are polished to a mirror finish.
Technical Specifications:
| Materials of Construction and Finish | |
|---|---|
| One Piece Solid Construction | Solid hex, 316 stainless steel |
| 1.0” NPT Female Thread Inside 1.5” hex | 316 stainless steel |
| Finish | Bright high polished external finish |
| Physical Dimensions and Weight | |
| Sensor Mounting Post Height | 3.0 inches or 76.20 mm |
| Mast Adapter Overall Length | 6.0 inches or 152.40 mm |
| Weight | 1.05 pounds or 476.27 grams |
| Tools Required for Mounting and Installation | |
| Pipe | 1.0” pipe for vertical mast with male thread |
| Open End | 1.5” open end wrench or large adjustable wrench |
Pricing:
Now you can purchase these products directly through our sister website:
|
AS Richards, wind sensor mast adapter
|
|
Click on photo to enlarge
|
Please inquire for pricing. Please call us at +1-507-454-2727 to place an order. Or click here to order online from Mast adapter, 152 mm (6 in) long, 1" NPT female, solid 316 stainless steel (C-MMA-16-06). For applications requiring only a single anemometer or wind vane mounted on a mast or pole. This is a special order item that may require a two week lead time prior to shipping. Part Number: APRS6531 Shipping Weight: 1.05 pounds RoHS: unknown Origin: USA 
|
Dimensional Drawing:
