APRS World, LLC

Stop Switch Rectifier

 

Home Products Services Order & Track Photo Gallery Contact Presentations

Introduction:

The Stop Switch Rectifier is used to control and connect an AC output wind turbine to a DC load. The stop switch portion allows the wind turbine to be stopped during low winds by shorting the AC phases together. The rectifier portion is a high efficiency three phase bridge rectifier that converts the AC from the wind turbine to DC.

The Stop Switch Rectifier is used with direct battery charging wind turbines to connect the wind turbine to the battery. It can also be used with DC input MPPT charge controllers or DC input inverters. Click for links to Product Summary and Mounting Template.

Stop Switch Rectifier

 

View more images in our Photo Gallery.


Specifications:

Stop Switch
Purpose Shorts all three phases together to stop turbine when switch is in “STOP” position
Type Toggle, 17.5mm (0.7 in) toggle length, 25 degrees angle of throw
Rating 25 amps at 125 VAC. 9A at 250 VAC. 20A at 30 VDC.
Contact Resistance 10 milliohms maximum
Electrical Life 25,000 operations minimum
Rectifier
Purpose Convert single or three phase AC to DC
Diodes Six 600 volt, 15 amp ultra-fast
Heatsink 61mm wide, 58mm tall, 24mm deep (2.4 x 2.3 x 0.9 in)
Connectors
AC 3 positions
DC 2 positions
Rating 30 amps at 600 volts
Wire Gauge 10 to 30 AWG
Pitch 9.53mm (0.375 in)
Torque 0.5-0.6 Nm (4.4-5.3 lb-in)
Mounting
Clips to 35mm DIN rail or four female #10-32 threads
Weight and Dimensions
Weight 280 gram (10 oz)
Overall Dimensions 84mm wide, 135mm tall, 70mm deep (3.3 x 5.3 x 2.76 in)
Materials
Bezel FR-4 fiberglass, 1.6mm (0.062 in) thick, blue with white printing
Circuit Board FR-4 fiberglass, 1.6mm (0.062 in) thick, 2 oz copper, double sided, gold plated,
plated through holes, green solder mask, white silk screen, UL 94V-0 flammability
Hardware Stainless steel, aluminum, zinc plated steel
Regulatory Compliance

Rohs Made in USA

Pricing:

Now you can purchase this product directly through our sister website:

Off Grid Options

Stop Switch Rectifier
Product Photo
Click on photo to enlarge
US Price: $100.00 USD
Please call us at +1-507-454-2727 to place an order.

Or click here to order online from Off Grid Options .

The Stop Switch Rectifier is used to control and connect an AC output wind turbine to a DC load. The stop switch portion allows the wind turbine to be stopped during low winds by shorting the AC phases together. The rectifier portion is a high efficiency three phase bridge rectifier that converts the AC from the wind turbine to DC.

The Stop Switch Rectifier is used with direct battery charging wind turbines to connect the wind turbine to the battery. It can also be used with DC input MPPT charge controllers or DC input inverters.

Stop Switch Rectifier



Part Number: APRS8550
Shipping Weight: 0.62 pounds
RoHS: compliant
Origin: USA

back to top


APRS World, LLC - Contact Us

In order to improve design and supply the best product possible, specifications may change without notice.